True Zero Order Waveplates

The thickness the this type of the true zero-order waveplates or retarders are very thin, the substrates are added to strengthen the waveplates, but in some applications of high damage threshold (>1GW/cm2), the substrates are not allowed, the special carefulness should be taken in operation on such waveplates without substrates.

Hangzhou Shalom EO offer the two types of true zero order waveplates: the singl plate without substrates and the cemented waveplate with substrates. The stocked modules are available for customer’s selection in fast delivery and low cost.

  • True Zero Order Waveplate-Single Plate

This type of zero order waveplate is designed for high damage threshold applocation (more than 1GW/cm2). As the plate is very thin, it’s easy to break during operation.

  • Wide Angle Acceptance
  • Better Temperature Bandwidth
  • Wide Wavelength Bandwidth
  • High Damage Threshold
  • AR Coated, R<0.2%
  • Single Plate

Standard Wavelength:
1/2:1310nm, 1480nm, 1550nm

1/4:980nm, 1064nm,1310nm, 1480nm, 1550nm

  • True Zero Order Waveplate- Cemented

This type of zero order waveplate is constructed of a true zero order waveplate and a BK7 substrate. As the waveplate is very thin and easy to be damaged,the Bk7 plate’s function is to strengthen the waveplate.

  • Standard Thickness:1.1±0.2mm
  • Cemented by Epoxy
  • Wide Angle Acceptance
  • Better Temperature Bandwidth
  • Wide Wavelength Bandwidth
  • AR coating, R<0.2%

Standar wavelength:
532nm, 632.8nm, 780nm, 808nm,980nm, 1064nm,1310nm, 1480nm, 1550nm

Laser Components >> Waveplates >> True Zero Order Waveplates

Hangzhou Shalom Electro-optics Technology Co., Ltd.

Leave a Reply

Your email address will not be published. Required fields are marked *