click me!

LiNbO3 Z-Cut, 9x9x25mm, Rectangular, Au electroded for EO applications

Code: 2043-002



Crystal Materials LiNbO3 crystals Size 9x9x25mm (Rectangular)
Size Tolerance +/-0.1mm Length Tolerance +/-0.2mm
Surface Quality 20/10 S/D Parallelism <20 arc seconds
Flatness < Lambda/10 @633nm Chamfer 0.1-0.3mmx45°
Chips <0.15mm Side Surface Fine ground
Orientation Tolerance < 10 arc minutes Wavefront Distortion <Lambda/4@633nm
Extinction Ratio >200:1 Coating AR/AR@1064nm or customized
Damaging Threshold  >100mW/cm^2@1064nm 10nS 10Hz pulse Electrode on Side Surface Chrome gold electrode (Cr+Au)

Note: crystals with other special specificaton is available upon request

LiNbO3 crystals have become one of the most commonly used material for Q-switches and phase modulators for its high EO coefficients, with an electric field applied transverse to the direction of light propagation, LiNBO3 cells can be configured to operate at a lower voltage than comparable KD*P cells. LiNbO3 can also be a good choice for infrared wavelengths as long as 3.0µm. Hangzhou Shalom EO offers the polished, and AR coating and Au-Cr electroded LiNbO3 crystals used in pockels cells. 
Preferably for Er:YAG-, Ho:YAG-, Tm:YAG laser 
Wavelengths up to 3μm 
Brewster for laser with low amplification

LiNbO3 crystals with bruster angle:

AR/AR@1064nm Cr+Au electrode
2-3 Days
DKDP Crystals for EO Applications

DKDP Crystals for EO Applications

  • High Deuteration (>98.0%) DKDP Crystals
  • Broad Wavelength Range: 0.3~1.1μm
  • Maximum Aperture: 50mm
  • High Transmission: >98%
  • Cr-Au Electrode